Home :: Heavy Duty Greenskin Crack Suppression/Isolation Premium Flooring Underlayment GS 4000 CSI

Back to school Sale 

619 807 0081

Spend $500.00 and get 15% off MSI or Emser

 

 

Call or CHAT with ANDY

for a Rock Bottom Quote

1-866 TILE PRO

 

 

 

 

Free Tile shipping 

for pick up at any

MSI or Bedrosians Showroom

type pickup in coupon codes

CHECK OUT ON LINE AND SAVE 

 

 type pickup in ty

Heavy Duty Greenskin Crack Suppression/Isolation Premium Flooring Underlayment GS 4000 CSI

Heavy Duty Greenskin Crack Suppression/Isolation Premium Flooring Underlayment GS 4000 CSI

 

Heavy Duty Crack Suppression/Isolation

Premium Flooring Underlayment - GS-4000CSI

100% MADE IN THE USA WITH OUR PATENTED “GO-GREEN” CONSTRUCTION DESIGNS

Premium Water Resistant, Recycled Anti-Fracture Non-Wicking Membrane

Save Time and Money w/ our 100% Primerless Chemistry – Simply Sweep!

OUR 1-2 Combo Punch is our Super Hi-Strength Patented Antimicrobial/Non-Wicking Design

plus our 40% Lighter Weight Than Typical Noxious Asphalt/Membrane Designs

Patented Elastomeric Adhesive-Membrane Design Provides Up To 1/2” Crack Strength

Passes (and exceeds) ANSI 118.12 for 1/8” Crack Suppression/Isolation (High Performance Rating)

Guaranteed Zero Moisture Wicking for the Ultimate in Water Resistance/Protection

E-Z Peel Self Adhered/Peel and Stick Technology for Silky Smooth Tear Resistant Liner Release

Super-Aggressive Crystal Clear Hot Melt PSA Adhesive w/ Zero VOC’s/Solvents

5 Layer Membrane Construction w/ Hi-Strength Insulating Water Tight METPET Core

Maximum Water Resistance/Protection via our Patented HYDRO-SEALtm Butt-Seam/Joint Design

Highly Reflective/Super Energy Efficient/Insulated Core

Zero Light Transmission Provides Maximum Adhesive Protection Against UV/IR – 100% Opaque

70% + Recycled/Reclaimed Content by Weight – Fully Sustainable

Standard GreenSkin Colors: “GO-Green”/Metallic – Personalized Logos/Private Label Designs Available on All T/L Orders

Standard Adhesive Color/Tint: Clear

WE ARE VERY PRICE COMPETITIVE! WE DO NOT UPCHARGE FOR OUR GO-GREEN DESIGNS!

Applicable Testing Procedures:

Passes (and exceeds) ANSI 118.12 for 1/8” Crack Suppression/Isolation (High Performance Rating)

Adhesion to Plywood: ASTM D903 = 4.25 lbs/in width

Tensile Strength MD: ASTM D882 = 209 Lb/In-Width – TD: ASTM D882 = 223 Lb/In-Width

Tear MD: ASTM D1922 = 5,681 Grams – TD: ASTM D1922 = 5,966 Grams

Elongation at Break: ASTM D412 = 500% Minimum

Made with Pride in the Heartland of the USA! Application Temperature = 15 deg F – 140 deg F

Service Temperature = -25 deg F – 195 deg F

Robinson Flooring: ASTM C627 = Extra Heavy Commercial Rating (successfully completed cycles 1-14)

Puncture: ASTM E154 = 192 Lbs

Water Vapor Transmission Rate: ASTM E 96-53 (Method E) = .0011 perms

 

MSDS FOR POLYPROPYLENE BASED, METALLIZED POLYESTER

REINFORCED, GREENSKIN CRACK SUPPRESSION/ISOLATION

UNDERLAYMENT MEMBRANE, W/ BLOCK COPOLYMER HOTMELT

ADHESIVE - AND U.V. (CURED) SILICONE COATED RELEASE LINER

(ALL PRODUCT(s) LISTED BELOW ARE SELF-ADHERING).

MSDS:

1. CHEMICAL PRODUCTS AND COMPANY IDENTIFICATION

Material Identity:

Product Name: GS-4000CSI (CRACK SUPPRESSION/ISOLATION) “ANTI-FRACTURE” Self-Adhering Membrane w/ Block

Copolymer Hotmelt PSA, and white Polyolefin Silicone Coated Release Liner.

Company:

DEVCOM Manufacturing (DEVCOMTAPE.COM)

1434 Knox Avenue // Suite #104 // Easton, PA 18040 // 855.476.7546

2. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients: % By Weight

Biaxially-oriented polyethylene terephthalate (BOPET) - Skins 4

Polypropylene Nonwoven Fabric Membrane- Core 59

Block Copolymer Hot Melt Adhesive - Glue 23

Silicone Coated Release Film - Liner 14

3. HAZARDS IDENTIFICATION

Potential Health Effects

Eye: Contact with the eye is not likely, but can cause eye irritation if adhesive contacts eye.

Skin: May cause mild skin irritation after repeated or prolonged skin contact and removal.

Ingestion: Swallowing of this material during normal handling is not likely. If swallowed seek medical attention for swallowed

solid acrylic adhesive material.

Inhalation: The smell of this adhesive is not likely to cause harmful effects.

Symptoms of Exposure: Signs and symptoms of exposure to this adhesive through ingestion and or skin contact may

include: stomach or intestinal upset (nausea, vomiting, diarrhea), and skin irritation.

Chronic Effects: No Data

4. FIRST AID MEASURES

Eyes: If eye contact is made with adhesive. Flush eyes gently with water for at least 15 minutes while holding eyelids apart;

seek immediate medical attention.

Skin: Wash exposed area with soap and water. If rash continues seek medical attention.

Ingestion: Seek medical attention.

Inhalation: No need for first aid is anticipated

5. FIRE FIGHTING MEASURES

Flash Point: Like film

Explosive Limit: N/A

Hazardous Products of Combustion: May form carbon dioxide, carbon monoxide and various hydrocarbons.

Fire and Explosion Hazards: None

Extinguishing Media: Regular foam, water from fog nozzles, carbon dioxide, dry chemical.

Fire Fighting Instructions: For large fire full, turn-out gear. Do not inhale smoke wear self-contained breathing apparatus.

NFPA Rating: Not determined

6. ACCIDENTAL RELEASE MEASURES

N/A

7. HANDLING AND STORAGE

Do not get in eyes, or on clothing. Follow your company’s policies.

Ideally, store at 70ºF +/- 5ºF at 50% humidity.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Eye Protection: Avoid eye contact.

Skin Protection: Gloves not normally required. Avoid prolonged or repeated skin contact

Respiratory Protections: Not expected to be necessary under normal use

Engineering Controls: N/A

Exposure Guidelines: N/A

9. PHYSICAL AND CHEMICAL PROPERTIES

State: Clear/Transpant (Colored) Hot Melt Adhesive Coating, applied to a multi-layer PP-NW + METPET Film Lamination +

(White Silicone Coated Release Liner on Backside).

Color (front to back): : Green PP-NW, Silver backside METPET lamination, clear Hotmelt PSA, White Polyofefin Release

Liner.

10. STABILITY AND REACTIVITY

Hazardous Polymerization: Will not occur

Hazardous Decomposition: May form: carbon dioxide, carbon monoxide and various hydrocarbons.

Chemical Stability: Stable

Conditions to Avoid: Avoid contact with strong alkalies, strong mineral acids, strong oxidizing agents.

11. TOXICOLOGICAL INFORMATION

None Established

12. ECOLOGICAL INFORMATION

None Established

13. DISPOSAL CONSIDERATION

Waste Management Information

Dispose in accordance with applicable local, state and federal regulations.

14. TRANSPORT INFORMATION

DOT Information: Product is considered non-hazardous

Container/Mode: Slit roll, Master or pallet

NOS Component: None

RQ (Reportable Quantity): N/A

15. REGULATORY INFORMATION

US Federal Regulations: N/A

16. OTHER INFORMATION

None

The information contained herein is based on data considered accurate. However, to warranty is expressed or

implied regarding the accuracy of this data or the results to be obtained from the use thereof. Information in Section

15, Regulatory Information, is intended to be as complete as possible. It is ultimately the user’s responsibility,

however, to determine state, and local laws in the use of this product. Devcom MFG, LLC assumes no responsibility

for personal injury or property damage to vendees, users, or third parties caused by the material. Such vendees or

users assume all risks associated with the use of the material 

There are no available products under this category.
Gift certificates